Effective rabbit management requires coordination and continuity. Tailor control methods to your property's specifics, engaging professional contractors as needed. Develop a long-term plan to keep rabbit numbers low, instead of reacting to crises.
Fencing your property can be expensive, but it is an effective way to protect your land and to maximise the effectiveness of any control work that you undertake. To be effective, a rabbit fence should:
Gates should be kept closed when not in use, preferably with a concrete sill under them to prevent rabbits from squeezing their way underneath.
Alternatively, rabbit netting can also be used to prevent rabbit movement under or around the gate.
Cylinders of rabbit netting, plastic netting or sheet steel guards are also useful for protecting young trees or shrubs from rabbits.
Primary control is used as an initial knock-down for rabbit numbers. Primary control can reduce rabbit numbers significantly but will never eradicate the population completely, and if the remaining rabbits are not addressed then rabbit numbers will bounce back.
The most common form of primary control is poisoning.
An effective rabbit poison is the anticoagulant, Pindone. This is available in bait form as liquid Pindone, usually laced carrots, or Pindone pellets. The optimum time to use Pindone poison is in winter, as this is when food sources are most scarce and fewer young rabbits are present due to other mortality factors. Like most anticoagulants, Pindone is slow acting and requires the rabbit to consume baits over several days to be effective, with this in mind it is considered to be a humane poison.
It's always best to ensure that no domestic stock or pets have access to the areas being treated. It is, therefore, essential to plan stock movements in advance to accommodate the intended poisoning operation. An effective antidote (Vitamin K1, phytomenadione) is available from veterinarians either as an injection or as a tablet, if required.
Warning signs must be erected at all access points to the areas being treated and ideally you will be undertaking control work in collaboration with your neighbours but if not, you should notify all adjacent land occupiers (and any others who may have access to the area) of your intention to undertake a poison operation.
Caution: When using any herbicide or pesticide PLEASE READ THE LABEL THOROUGHLY to ensure that all instructions and safety requirements are followed.
Liquid Pindone laced carrots generally work best during winter months. As liquid Pindone laced carrot cannot be stored for long periods of time, planning of anticipated operations needs to be conveyed to contractors well in advance to ensure sufficient carrot is available from growers.
Pindone carrot baiting must be undertaken by the holder of an Approved Use for Pindone Certificate and/or Controlled Substance License (CSL).
Pindone pellets are readily available, store quite well and are ideally used when natural feed conditions are dry (e.g. summer). They can be dispensed in bait stations by anyone, provided they follow the manufacturer’s instructions. Pindone pellets can also be broadcasted outside of bait stations – however this can only be undertaken by the holder of an Approved Use for Pindone Certificate and/or Controlled Substance License (CSL).
Please note results can be variable when broadcasting pellets outside of bait stations if the environmental conditions are unsuitable (e.g. ground moisture can be absorbed by the pellets making them less palatable).
While bait stations may have an advantage of not requiring a CSL, rabbits are generally cautious about feeding from them as they are neophobic.
Watch the video below to learn more about using pindone pellets in bait stations.
Find further information on how to use Pindone pellets effectively.
Secondary control measures can be used as a follow up to primary control to help address the last remaining rabbits, or as an on-going maintenance tool to keep rabbit numbers low. It is important to note that installing and maintaining a good rabbit fence (including a rabbit netted gate), will maximise the effectiveness of any control work that you undertake by reducing reinvasion from adjacent areas.
The most common secondary control methods are listed below, and more information about each is given in the following subsections:
Other secondary control methods include ripping / burrow destruction, trapping, ferreting, long netting and dogging.
An ideal habitat for rabbits is easily found on a lot of properties like gardens and lawns with short grass, garden sheds, wood piles or dense vegetation that provide cover.
Habitat changes to make your land less desirable for rabbits can have a more permanent impact on rabbit numbers than other methods such as poisoning.
You can do this by:
Fumigation is best used to control medium to low density populations or in conjunction with other methods such as a follow-up after a poison operation.
To effectively fumigate a rabbit warren, you need to be able to identify and seal off all entrances. This may require a coordinated approach across multiple properties and as with any poison operation you should try to coordinate with your neighbours if you are going to undertake work.
Fumigation can be carried out at any time of year, but it has the greatest long-term effect if carried out before the rabbit breeding season (late winter to early summer).
Fumigants are toxins used to kill rabbits in their burrows. When a fumigant is introduced to a burrow system it produces toxic fumes, which are inhaled by the rabbit’s causing death by absorption through the lungs.
The main advantage with using fumigants is that the operator does not have to rely on the rabbit eating bait. It is also a very effective method of controlling young rabbits which don’t wander far from their burrows.
Fumigation using Magtoxin
The most common fumigant used to control rabbits is Magtoxin. Magtoxin is a solid fumigant that reacts with water vapour from the soil and air to release a toxic and flammable gas called hydrogen phosphide. This gas is heavier than air and flows through the burrow.
Engaging a professional contractor is recommended, however anybody can purchase up to 3kg of Magtoxin from rural supply stores and carry out the work themselves without needing a Controlled Substance Licence (CSL). If you are planning to undertake the work yourself, please note the following: :
Controlling Rabbits with Fumigation.
Watch the video to learn more about using fumigation (magtoxin).
Shooting is an effective method of controlling low rabbit infestations. Shooting to control medium or high rabbit numbers has limited effect on the population level and may result in surviving rabbits becoming more wary. Poisoning is a more appropriate and cost-effective method for controlling medium to high levels of rabbits.
Shooting is ideally used as a secondary control method after a poisoning operation to address remaining rabbits (i.e. mop up survivors), and as an on-going maintenance tool to keep rabbit numbers low.
Engaging a professional contractor to do this work is recommended, but if you are undertaking the work yourself, please note the following:
You can employ an individual or a business to undertake or support you with rabbit control on your property. Having a reliable contractor with the right skills and equipment is important for effective control; and having some knowledge yourself of how to manage rabbits and what to expect from a good management plan will give you better results.
We recommended that you ask your neighbours, other nearby landowners, local biodiversity groups or farming groups for their suggestions.
Alternatively, if you are interested in more information about rabbit contractors working in your area, please contact us on 0800 474 082 or at biosecurity@orc.govt.nz and we can email you a current list.
A good contractor should be able to discuss options for permanently reducing rabbit numbers (i.e. long-term control) rather than just focussing on immediate gains (i.e. short-term control). A good contractor will also be able to answer the following:
It is recommended if hiring a contractor, you encourage them to conduct a site inspection to obtain an accurate quote.
Your contractor may ask:
If you’re unable to provide this information, recommend the contractor inspects the site. If they don’t ask at least some of these questions, it is worth seeking additional quotes.
At a minimum, the contractor should be able to outline:
The contractor may also outline how to assess changes in active burrows, rabbit abundance, plant germination and recovery, night counts, and before-and-after photos.
You will see evidence of active rabbit behaviour such as fresh new scratchings (freshly turned soil), fresh droppings (black and shiny), reopened or new burrows created, vegetation attacked, and crops grazed. In time, more burrows will be reopened or dug.
The aim of these programmes is to support communities to develop and maintain a strategic long-term management approach to rabbit control rather than a reactive one-off control approach.
To achieve this, the focus is on facilitating a coordinated community approach and educating community about the benefits of implementing a strategic approach, starting with a primary control operation followed by implementing ongoing secondary control methods.
This approach is more likely to result in a long-term reduction in rabbit numbers and sustained control.
Rabbit Haemorrhagic Disease Virus (RHDV) also known as rabbit calicivirus disease was introduced to New Zealand illegally in 1997. Although viruses can provide a good knock back in numbers, ongoing rabbit management is still needed to keep numbers low.
In 2018, a controlled release of the RHDV1 K5 virus around New Zealand took place, led by the Ministry for Primary Industries (MPI). The effectiveness of the virus on feral rabbit populations is still being studied by Manaaki Whenua - Landcare Research. The RHDV1 K5 virus is only harmful to rabbits and doesn’t affect any other animals.
The RHDV2 virus has been confirmed in New Zealand. Cases of this have been picked up as part of monitoring for the controlled RHDV1 K5 release. Biosecurity New Zealand will continue the surveillance programme to help understand the new strain's spread.
The Otago Regional Pest Management Plan 2019-2029 (RPMP) identifies feral rabbits as a pest animal to be managed under a sustained control programme. To implement a sustained control programme, and monitor the efficacy of this programme, ORC currently undertakes night count and day inspection monitoring. Opportunity for improvement to the programme and monitoring methodologies was identified in 2021. In addition, the establishment and facilitation of community rabbit programmes, to address rabbit management in peri-urban and urban areas, requires revision of current monitoring methodologies to be fit for purpose for smaller property areas.
ORC commissioned two external reviews of the current ORC rabbit monitoring methodologies and tools and invited recommendations for improvement and development. These recommendations were synthesised alongside staff feedback and used to develop an action plan for night count and rabbit density monitoring; inspection and night count monitoring analysis; virology and serology; proneness and climate change; networking and engagement; and strategy and management. Implementation of this action plan is underway.
Review of rabbit management initiatives
Authorised Person – under the Biosecurity Act 1993 an Authorised Person is authorised to administer and enforce the provisions of the Act, for example an ORC Biosecurity Officer.
Land occupier – an occupier includes a person who physically occupies the place, whether they own it or not. For example, if you are renting a house owned by someone else that does not live on that property, you are the occupier. You can see more about the responsibilities of occupiers (including owners) in section 3.3.1 of the Regional Pest Management Plan 2019-2029.
Neophobic – neophobia is the fear of anything new.
Sign – any evidence of rabbits being present, such as burrows, scratchings or scat.